-
HIGH PRECISION SURFACE ROUGHNESS TESTER BS-462 , TOUCH SCREEN
● It can measure the roughness of various machined parts, such as plane surface, bevel surface, outer cylindrical surface,
curved surface, small hole, groove and car axle etc.
● Application for Surface roughness measurement of metal and non-metal parts and workpiece, including a variety of machining parts, machining manufacturing, testing, commodity inspection departments,it is especially suitable for on-site inspection of large workpiece and production lines and the inspection, measurement, commodity inspection and other departments of the outbound verification, no damage to the workpiece. -
HINGED PIPE CUTTERS
The MHP series manual hinged pipe cutters operate with minimal cutter rotation (90-110 degree) as necessary for
tight quarters, with four blades which Designed for rapid cutting of 1’’ through 8’’
steel, heavy-wall steel and cast-iron pipes. There is no sparks during cutting operation, serving jobs with such special requirements -
HOLE CUTTING MACHINE, FERRO.4A
HOLE CUTTING MACHINE, FERRO.4A
The FERRO.4A is designed for drilling up to 4Inches (114MM) into
steel pipes. Light-weight compact design, allows you for drilling in
small diameters. 1500W universal motor ensures quiet working performance. Two way feed handle can operate the tool from either left or
right . -
HOLE CUTTING MACHINE, FERRO.6
Model FERRO.6 is designed for drilling holes up to 6”(152MM) into steel pipes. The ‘Ferro.6’ has a 5/8” (16mm) capacity drill chuck to use all sizes
of hole saws and hole saw arbors. An integral motor and gear reduction optimizes performance of large diameter hole saws. Two way feed handle can operate the tool from either left or right . -
-
HSS ANNULAR CUTTERS –30MM LONG, MACSHANK
MAC-SHANK Annular cutters from MACSTROC, which is a combination of “Weldon-shank” and “Universal-shank” An-
nular cutters. It has set 90° Flats for grub screws in traditional “Weldon-shank” machines and one-touch grooves forQuick connect. Macstroc annular cutters are superior with it’s quality which provide 2X life and the fastest cut. It fits
into 90% of Magnetic drilling machines, as well as other stationary machines. A special formula used in the cutters,
reduces the risk of breakages. -
-
INDUSTRIAL CUT-OFF SAWS 16” (400MM)
Macstroc® cut-off saws are built purely for industrial use, with heavy-duty 3PH or 1PH induction motors and 400MM Abrasive wheel useful in various industries. High power motor provides outstanding performance for cutting of materials with high toughness and tenacity. The machine can cut directly at 90°, or unilaterally cut 45° to 90°, left and right.
-
L – SERIES TCT ANNULAR CUTTERS 55MM
*Custom sizes up to Ø150MM in scope of supply. *TCT use in hard and high tensile steel, stainless steel , rail steel as well as difficult materials, non-ferrous and alloys.
-
-
-
LOW CLEARANCE ROTARY CUTTER
WE supply this range of Low clearance cutters from 6″ through 26inches. With good leverage from the tool’s long handle, pipe snaps off squarely before the cutter wheels penetrate halfway through the pipe. Provides a square cut and can be used in close quarters. Low clearance pipe cutters can use in the ditch, underwater, in noise-free zones, over head, in racks of pipes, etc… Operates with minimal cutter rotation (45 degree). Suitable to cut steel, cast iron, galvanized, ductile iron black iron and stainless steel pipes.
-
LOW PROFILE MAGNETIC DRILL, STROC.LP50X
Macstroc® industrial Mag-drill ‘STROC.LP50X is perfect for drilling in spaces with limited heights. It equipped with a powerful motor, 6 speed regulating gears, lock feed handle for both left and right operation.
-
-
MAGNETIC DRILL 75MM, STROC.75T
Macstroc® industrial Mag-drill ‘STROC.75T’ is suitable for both drilling and tapping. Cutting capacity of up to 75mm with 2-speed mechanical gear box , integral auto-cooling function.
-
MAGNETIC DRILL W/TAPPING 60MM, STROC.60HVT
MAGNETIC DRILL W/TAPPING 60MM, STROC.60HVT
Macstroc® industrial Mag-drill ‘STROC.60HVT’ is suitable for both drilling and tapping. Cutting capacity of up to 60mm with stepdown gear box , integral auto-cooling function, and supplied with external cooling device. Heavy-duty, variable speed function, and the design ensures stable support, faster drilling times , more accurate hole sizing and more cutter life.
KEY FEATURES
Variable Speed , Step down gear box, reverse function for tapping.
Stroke up to 220mm from work piece to spindle, enables to attach twist drill chuck and other accessories easily.
Ensures stable support, faster drilling, low maintenance. Minimal vibration, high accuracy and more cutter life.
MT3 spindle with integrated tool cooling and lubrication and external cooling device